 |
DongGuan Unite Industry Co., Ltd
Add： Shuibian Industrial District, Hengli Town, DongGuan City, Guangdong province China
Tel： 86-769-82020528Fax： 86-769-82020518E-mail： peifei@uniteyd.com
Http： 0376com.cn
|
|
|
|
| Current Location：Home » Solution » Precision axis » Long shaft - if there is a plug bouncing problem in use, it will bounce more |
Long shaft - if there is a plug bouncing problem in use, it will bounce more
|
|
Edit：admin Browse：1081 Date：2017-03-17
|
By detecting the vertical and horizontal piston rod to determine whether in the slideway and cylinder concentricity of a value, so as to determine whether the piston rod jump value beyond the prescribed range, if the actual situation is indeed a big jump, it may be caused by the wear of the supporting ring.
At the same time, its temperature has been rising, when reached a certain amount of heat is easy to cause surface burns, but also to make its size changes, if serious, will also lead to a precise linear optical axis directly lose efficacy. The major axis
But when it is in a linear motion state, there is a small friction resistance, so as to obtain better accuracy, linear optical axis also has the guiding role of sliding bearings. In the linear optical axis, the structural characteristics of the axis to a large extent reduce the weight of equipment, simplify the mechanical structure.
It is also possible that the fit tolerances between the fittings are not selected properly, or that the working procedures in machining are not processed properly, and that the same problem may arise when the positioning datum is not the same datum or the shape and position errors between the datums are excessive.
|
|
Previous：None！
|
|
Next：Precision axis - the problem of guiding accuracy should be taken into account in the selection of straight optical axis.
|
Print |
Close
|
|
|
Flying
86-769-82020528
