 |
DongGuan Unite Industry Co., Ltd
Add： Shuibian Industrial District, Hengli Town, DongGuan City, Guangdong province China
Tel： 86-769-82020528Fax： 86-769-82020518E-mail： peifei@uniteyd.com
Http： 0376com.cn
|
|
|
|
| Current Location：Home » Solution » Precision machining part » Machines are driven by the use of rotating parts, and the most common of these products is the linear optical axis. |
Machines are driven by the use of rotating parts, and the most common of these products is the linear optical axis.
|
|
Edit：admin Browse：924 Date：2017-03-16
|
From the point of view of the main components, there are mainly cylindrical surface, conical surface, internal holes and threads and the corresponding end face; from the length point of view, can not exceed the diameter range; and requires to have the basic role of transmitting torque and bearing load, so as to achieve the standard of supporting transmission parts.
Optical axis is an innovative micro-switch technology which is born on the traditional mechanical keyboard. By replacing the trigger metal dial in the traditional mechanical axis switch structure as infrared optical induction component, using the principle of optical induction, the optical axis produces different equivalent resistance, forming open circuit and circuit state, thus triggering the key signal instruction. . Due to the unidirectional transmission of optical signals, the input and output terminals are completely insulated by electricity. The keymouse peripheral equipped with optical axis technology has strong anti-interference ability, stable operation, no contact and long service life.
Of course, the types of linear optical axis is not a single, in order to meet the application of different occasions, there are a length-diameter ratio of less than five short optical axis, there are more than 20 slender optical axis, as well as stepped optical axis, hollow optical axis and crankshaft and other special products. In addition, their accuracy, surface quality and technical requirements are relatively high, usually based on the actual working conditions.
|
|
Previous：None！
|
|
Next：Most of the quality of the hydraulic cylinder is affected by the quality of the stopper.
|
Print |
Close
|
|
|
Flying
86-769-82020528
